Technical Data; Transport / Storage; Installation - Relyon plasma piezobrush PZ2 Betriebsanleitung

3

Technical data

Electrical data
• Supply voltage
• Power consumption
• Model
Dimensions
• Weight
• Length
• Diameter max.
• Diameter min.
• Cable length
Typical application parameters
• Plasma temperature
• Distance for treatment
• Width of treatment
• Treatment speed
Operating conditions
• Air humidity
• Temperature
Storage conditions
• Air humidity
• Temperature
4

Transport / storage

• Store the plasma generator in a dry place. This will prevent corrosion of the electrical
contacts. It is best to use the provided case for storage and transport.
• Protect the plasma generator from dirt and foreign bodies.
• Protect the plasma generator from falls or other hard impacts.
5

Installation

• Remove the plasma generator from the packaging.
• Use the external power plug to establish the power supply.
• Ensure that the workplace is well vented.
Attention - Damage to device
In order to prevent damage to the device, please ensure that you follow the advice in
chapter 7 Operation.
BA-PZ2_ML / F0351301
15 V DC
max. 30 W
Handheld device with external power plug
170 g (not including external power plug)
215 mm
36 mm
27 mm
1500 mm
< 50 °C
2 – 10 mm
5 - 20 mm depending on process parameters (see chapter 6)
10 – 20 mm/s
< 80% rel. (non-condensing)
10 – 40 °C; 50 – 104 °F
< 80% rel. (non-condensing)
0 – 60 °C; 32 – 140 °F
11