Turning The Power On/Off - Sony UY-S100 Bedienungsanleitung

Turning the Power ON/OFF

Turning on the power of the Film Scanner
Turning off the power of the Film Scanner
16
(GB)
Note
Turn on the power of the computer after turning on the power of all the
other devices.
ALARM indicator
BUSY
indicator
Reset switch
POWER switch and indicator
Press the POWER switch for two seconds or more until the green POWER
indicator lights. The power of the scanner turns on.
When you release the POWER switch, the green BUSY indicator lights
and the green POWER indicator flashes. During this period, the unit
initializes the carrier conditions. When the initialization is completed, the
BUSY indicator goes out and the POWER indicator remains lit in green.
Note
If any trouble occurs when the power is turned on, the ALARM indicator
remains lit in orange. In this case, check if the carrier, carrier cover and
lamp cover are mounted correctly.
Press the POWER switch for two seconds or more until the green POWER
indicator starts flashing, then release the switch.
Note
If you cannot turn off the power using the POWER switch, press the reset
switch using a thin tool.
(page 13 )
(GB)