Elevation Kit - ZUMEX ESSENTIAL BASIC Bedienungsanleitung

ELEVATION KIT

This Zumex machine has an Elevation Kit to make it easier to clean the surface where
it is located. Elevation Kit ref. 05230* this model does not include, is available in the
machine accessory catalogue.
This Kit must be mounted according to the following instructions:
COMPONENTS
INSTALLATION
The machine comes prepared for this Kit to be simply and quickly installed.
1
Place machine in assembly position.
Carefully place the machine on one of its sides, previously protecting this area to
prevent damage to the machine. This operation must be carried out between two
people, so that the base of the machine is in view, facilitating the work process
(see Fig. 1).
Legs
Adhesive felt disc
Screw-in stud
4
4
4
Fig. 1