Technical Service - ZUMEX ESSENTIAL BASIC Bedienungsanleitung

TECHNICAL SERVICE

The Zumex Essential Pro and Versatile Pro juicers provide you with the information
you need for correct unit maintenance. They are also fitted with a squeezed orange
counter which can be configured in this mode. Press the MENU key for a few seconds
to enter the menu and select TECHNICAL SERVICE, press ON to confirm your selection
and OFF to return to the previous menu.
SERIAL NUMBER: This shows you your juicer's serial number which is essential for any
TECHNICAL SERVICE consultation.
On the TECHNICAL SERVICE menu select SERIAL NUMBER and press ON to confirm your
selection. You can see the serial number on the screen. Return to the previous menu
by pressing OFF.
VOLTAGE: This shows you the mains voltage at the time of the consultation, vital for
any Technical Assistance Service.
On the TECHNICAL SERVICE menu select VOLTAGE and press ON to confirm your selec-
tion. You can view the voltage on the screen. Return to the previous menu, pressing
OFF.
CALIBRATION: This shows you the calibration value of your machine which must be
adjusted in exceptional cases when the counter is not counting correctly. This infor-
mation is vital for any Technical Assistance consultation. It also lets you change the
values manually. This procedure must only be carried out at the indication and with
the aid of an authorised Technical Assistance Service.
Calibration value: On the TECHNICAL SERVICE menu select CALIBRATION > CALIBRA-
TION VALUE and press ON to confirm your selection. You can view the calibration
number on the screen. Return to the menu, pressing OFF.
Offset Value: On the TECHNICAL SERVICE menu select CALIBRATION
> OFFSET VALUE and press ON to confirm your selection. You can view the offset
number on the screen. Return to the menu, pressing ON.