Safety Information; During Installation - Haier DW12-PFE8-Serie Bedienungsanleitung

Safety information

At time of delivery
Check packaging and dishwasher immediately for signs of transport damage. If
the appliance is damaged, do not put it into use but contact your supplier or
customer service without delay.
Please dispose of packaging materials properly.

During installation

Ensure that the domestic wiring is properly earthed.
Site the dishwasher and connect it up in accordance with the installation instructions.
The dishwasher must not be connected to the electricity supply while installation
is being carried out.
The mains electricity supply must conform to the details shown on the dishwasher
nameplate.
Do not connect the dishwasher to the electricity supply via an extension cable.
After the appliance has been installed,the mains plug should still be easily
accessible.
During installation, the power supply cord must not be excessively or dangerously
bent or flattened.
This appliance cannot be installed outdoor, not even if the area in which it is
installed is covered by a roof; it is also very dangerous to leave it exposed to
the rain and elements.
During normal use
The dishwasher must only be used by adults for the washing of household dishes
and cooking utensils.
Do not place any heavy objects or stand on the door when it is open. The appliance
could tip forward.
The water inside the dishwasher is not suitable for drinking.
Do not use solvents of any kind inside your dishwasher. They could cause an
explosion danger.
Open the door very carefully if the dishwasher is operating. There is a risk of water
squirting out.
Do not touch the heating element during or after a wash cycle.
Fundamental rules to follow when using the appliance:
- Never touch the dishwasher when barefoot or with wet hands or feet;
- We discourage the use of extension cords and multiple sockets;
- If the appliance is not operating properly or maintenance must be performed,
disconnect the appliance from the power supply.
EN
2