Tack life PSFS1A Bedienungsanleitung Seite 9

Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
♦♦ Insert two screw clamps
tool tight.
Tips and tricks
■■ Never work on wood and metal using the same abrasive belt
■■ Ripped or torn abrasive belts can damage the workpiece.. For this reason, replace abrasive
belts regularly.
■■ Only store abrasive belts in a hanging position since they are made unusable by creases etc..
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch the appliance off and remove the power plug before
starting any work on the appliance.
The belt sander is maintenance-free.
■■ Always clean the appliance directly after finishing work.
■■ For cleaning the housing use a dry cloth, under no circumstances should you use deter-
Softwood
60
240
high (5–6)
Chipboard
60
150
high (5–6)
Whetting paints
150
320
low (1–2)
Plastics
120
240
low / medium (2–3)
Nonferrous metals (e.g. aluminium)
80
150
medium / high (3–4)
into the opening is provided
07
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
Workpiece / sector
Coarse sanding (grain)
Fine sanding (grain)
Rotation speed
preselection
and use them to clamp the power
.
Hardwood
60
180
high (5–6)
Removing paint / varnish
60
––
high (5–6)
De-rusting steel
40
120
medium / high (3–4)