Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Congratulations on the purchase of your new appli-ance.. You have selected a high-quality
product. The operating instructions are part of this product. They contain important information
on safety, usage and disposal. Before using the product, please familiarise yourself with all
operating and safety instructions.
Use the product only as described and for the specified areas of application. Please also pass
on these operating instructions to any future owner.
Intended use
The belt sander is designed for dry surface sanding of wood, plastic, metal and plaster and
painted surfaces depending on the sandpaper used. The appliance may only be used for dry
sanding. Please note that you need to use appropriate sandpapers with different grains for
working different materials, and that the machine speed must also be adapted to the material..
The appliance is not intended for commercial use. Any other uses of or modification to the
machine is deemed to be improper and carries the risk of serious personal injury. The manufac-
turer accepts no responsibility for damage(s) attributable to misuse.
Package contents
1 belt sander PSFS1A
13 abrasive belt (grain size 80x7 120x6)
1 dust box
1 extraction adapter and reducer (for external dust extraction)
2 screw clamps
1 set of operating instructions
Technical data
Rated voltage: 230 V / 50 Hz 120V/60Hz(5A)
Rated power consumption: 600 W
Idling belt speed: 170–250 m / min
Rated idling speed:
Abrasive belt: 75 x 457 mm
Protection class: II/
n0 360–560 rpm
(double insulation)
Abrasive belt
Additional handle (rubberised grip)
External extraction adapter
Reducer
Adapter fitting
Clamping lever for abrasive belt
Screw clamp
10
A
12
01
11
B
C
13
14
Werbung
