Unpacking The Appliance; Overview Of The Components - Clatronic MBG 3727 Bedienungsanleitung

Unpacking the Appliance

1. Take the appliance out of its packaging.
2. Remove all the packaging material such as plastic foil,
filling material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the box.
4. In case of incomplete delivery or damage, do not oper-
ate the appliance. Return it to your dealer immediately.
NOTE:
There may still be dust or production residues on the
appliance. We recommend to clean the appliance as
described under "Cleaning".

Overview of the Components /

Scope of Delivery
1 Temperature switch
2 Function switch
3 Time / main switch
4 Operation indicator light
5 Heating element
6 Glass door
7 Door handle
8 Grill rack
9 Baking tray / drip pan
10 Crumb tray
11 Removal tool for grill rack and baking tray
12 Revolving spit
12a Spit forks
13 Removal tool for revolving spit
Controls
Top Control: Temperature Switch
Select a temperature between 100 and 230 °C.
Centre Controls: Function Switch
OFF Off
Top heat and bottom heat with convection
Top heat with convection
Top heat and bottom heat
Top heat with revolving spit
Top and bottom heat with revolving spit and
convection
Bottom Control: Time / Main Switch
Select an operating time of up to 60 minutes.
The oven is switched off at position OFF. The control lamp
is off.
32
MBG3727_IM
Notes for Use
Before Initial Use
There is a protective layer on the heating element. To
remove this, operate the appliance for about 15 minutes
without any contents. Set the function switch to
NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufficient ventilation.
Electrical Connection
1. Make sure that the function switch is in the OFF position.
2. Check whether the mains voltage that you want to use
matches the one of the appliance. You will find the infor-
mation about this on the type plate.
3. Insert the plug in a duly installed protective contact
socket.
CAUTION: Overload
When using extension cords, these should have a cable
cross-section of at least 1.5 mm².
Removal Tool (11 / 13)
a) To remove the baking tray
b) To remove the grill rack
If you want to remove the revolv-
ing spit, use the removal tool (13).
Operation
WARNING:
• Never use containers made from plastic, cardboard,
paper, or similar. Risk of fire!
• Do not use roasting bags or glass containers. These
may burst.
• Also, when using the handles for the baking sheet or
the revolving spit, protect yourself from the heat by
using gloves or pot cloths.
CAUTION:
Do not overload the baking tray and the grill rack!
(max. 3,5 kg)
NOTE:
• Always slide the crumb tray under the bottom heating
element.
• We recommend to preheat the oven for approx.
5 - 10 minutes.
• Save energy by using the switch settings with convec-
tion. In doing so, the heated air is distributed quicker
and evenly via the fan inside the oven.
• Always use the inserted drip pan when grilling or
roasting. This prevents grease from dripping onto the
bottom heating element.
.
18.10.18