Fulgor Milano CHDD 9010 RC X Bedienungsanleitung Seite 12

It is possible to connect on the front or on the back part of the downdraft a tube of diameter 150.
Remove the lid traced out before with the help of a hammer and fix the flange with 4 screws already included. Then
connect the tube. It is possible to connect on the side of the downdraft a tube 220x90 or 230x80 on both sides and
beneath. (Fig.1A)
Extraction at the sides is difficult, and only recommended when the other outlets cannot be used.
It is possible to connect on the front or on the back part of the downdraft a motor DDM (Fig.1B)
CHDD - LHDD + DDMA
CHDD - LHDD + DDM
EN -9
Fig. 1A
Fig. 1B