Control Functions - Fulgor Milano CHDD 9010 RC X Bedienungsanleitung

As for the height adjustment of the moving part of the downdraft, see Fig. 2.
According to the thickness of the work top and the cover, it is possible to adjust of 20mm.
This adjustment is possible by acting on the two nuts that secure the central pivot of the actuator (Fig. 3).
Fig. 2
REMOTO CONTROL
If the button is pressed while the downdraft is moving, the downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or "E".
If the button is pressed when the suction motor is on, the motor automatically turns off.
NOTES: at first use it is necessary to start the remote control learning. When the downdraft is turned off, keep button
F
COVER
SUPPORT

CONTROL FUNCTIONS

BUTTON "A"
With suction motor turned on, every time the button is pressed the motor speed will be
reduced of one step.
BUTTON "B"
With the downdraft extracted from 20 to 50 cm, the suction motor can be turned on
and/or off.
Hood with LED lighting: With the downdraft extracted, each press of the button, in
sequence: turns on the motor at the second speed, turns on the lights, turns off the
motor, turns off the lights.
BUTTON "C"
With suction motor turned on, every time the button is pressed the motor speed will be
increased of one step. At the 4th motor speed (intense) after 5 minutes the 2nd speed is
automatically set.
BUTTON "D"
By pressing the button once, the downdraft is of 20cm extracted.
By pressing the button one more time the downdraft is completely extracted.
If the button is pressed while the downdraft is moving, the downdraft automatically
stops. To restart the movement, it is necessary to press button "D" or "E".
BUTTON "E"
By pressing the button once, the downdraft returns in completely.
Fig. 3
"F" pressed for 3-8 sec. The remote control learning is
indicated with the flashing led. If, within one minute there is a
valid remote control code (sent by pressing any button of the
remote control), the led will be on continuously for 3 seconds
and then it will turn off, indicating the proper learning.
EN -10