Vimar Elvox RS10 Installations- Und Benutzerhandbuch Seite 24

RS10
1
Even with the gate not closed, after entering programming mode by pressing UP, OK, and AP/CH, the gate starts opening until the limit switch is
engaged. After 2 seconds the gate starts closing at cycle speed, slows down and continues until the closing limit switch is engaged. The control panel
saves the gate travel (the deceleration speed and distance are set as by default).
6.2 - RAD: remote control management menu is divided into 4 parameters
22
2 3
5 6
Pressing
1 time up
Pressing
2 times up
Pressing
3 times up
EN
4