Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Fig.3
- Place the bracket against the wall and secure with the two screws (supplied). For assembly,
screws and expansion plugs should be used that are suitable for the wall type (for example
reinforced concrete, plasterboard, etc.). If screws and plugs are supplied with the hood, make
sure in advance that these are suitable for the wall on which the hood is to be installed.
2
1
D
G
G
Fig.4
Fig.5
- To install the cooker hood fi t the electric unit
- Secure the bracket with the four screws G,
upright (Fig.4).
as indicated in Figure 5.
GB 16
Werbung
Kapitel
