Hama PREMIUM X10CD Bedienungsanleitung Seite 10

g
4.2.2 Shred paper and plastic cards
Insert the paper or the plastic card into the centre of the feed shaft
(5). The cutting rollers are switched on automatically.
Let go of the paper or plastic card. The device switches off automa-
tically after shredding is completed.
NOTE!
4.2.3 Shredding CDs, DVDs, and BluRay discs
Slide the operating switch (2) to the "Rev/On CD" position. The
cutting rollers begin turning continuously and the device is ready
for cutting CDs, DVDs, or BluRay discs.
Insert the CD, DVD or BluRay disc into the centre of the feed shaft
(3).
Let go of the CD, DVD or BluRay disc. After shredding is comple-
te, slide the operating switch (2) to the "OFF" position in order to
switch the device off, or slide it to "On/Auto" to switch to standby
mode for paper and plastic card shredding.
4.2.4 Forward and reverse modes
NOTE!
Slide the operating switch (2) to the "Rev/On CD" position. The
rollers of the cutting system rotate in reverse.
Slide the operating switch (2) to the "On/Auto" position.
Switch approximately three times successively between the posi-
tions "Rev/On CD" and "On/Auto".
Switch off the device and remove the jammed paper or plastic card
from the feed shaft (5).
10
Empty the bin frequently in order to prevent damage to the
device.
These modes serve to remove any blockages in the cutter
system.
Premium X10CD