Border Preferences; Size; Calibration; Screen - HP Cricut Imagine Benutzerhandbuch

Inhaltsverzeichnis

Verfügbare Sprachen

.10

select and print the border color using the original color defi ned by the artist who

created the image. To select a different color, follow these instructions.

• Select Custom in the top drop-down box.

• Click the Defi ne Color button.

• Click one of the pre-defi ned colors in the Basic Colors section.

• Click Apply.

If you wish to use a color which isn't already in the Basic Colors section:

• Select Custom in the top drop-down box.

• Click the Defi ne Color button.

• Click a blank square in the Custom Colors area to select it.

• Drag the indicator around the circle until you fi nd the color you want.

• Use the arrows at the top and bottom of the control to the right of the color

wheel to adjust the luminosity of the color. You can also enter exact RGB values

if you know them using the Red, Green, and Blue controls below the Custom

Colors section.

• Click Apply.

size

This control allows you to change the thickness of the image border.

By clicking the plus and minus keys above and below the control, you

can increase or decrease the size by increments of .01 of an inch.

Calibration

This section gives you the ability to change the calibration of the touch screen,

print alignment, and blade placement.

screen

This control allows you to recalibrate the touch screen of your Cricut

Imagine

the screen with the stylus gives you inaccurate results, or that your

touches seem to react with an unintended area of the screen. Using

this function will present you with fi ve crosses, displayed one at a

time in the four corners and the middle of the screen. Touch the cross

with the stylus in its center, and the next cross will appear. After the

fi nal cross, your Cricut Imagine