Settings; Print & Cut; Print Quality; Paper Type - HP Cricut Imagine Benutzerhandbuch

settInGs

The settings screen provides control over general settings for your
Cricut Imagine .
™
Choosing Print & Cut will print the project on the paper, and then cut the images
out. Print only will print the project on the paper without cutting the images out.
Cut only will cut the images out without printing them.
This option provides control over the quality of the printing done on the project.
Best Quality uses the most ink, but provides the most rich and accurate color
recreation. This option also takes the most time to print. Draft Quality uses less
ink and prints faster, but the image colors resulting from using this setting will not
be as vivid as they would be when using Best Quality.
This option allows you to specify the type of paper being printed on and cut,
which effects not only the amount of ink being used in the print process, but also
the amount of dry time between printing and cutting. Select Glossy when using
photo paper or other papers which have a glossy fi nish. Select Matte for regular
paper with a matte fi nish. Select vinyl when printing on Cricut Imagine
Printable Vinyl.

HP Ink

This section has an indicator for the black and color ink cartridges
for the Cricut Imagine
a LoW indicator will show up for the cartridge. If ink levels are suf-
fi cient, the indicator will read ok.

Clean Print Heads

This control will clean the print heads. It should be noted that, unlike
other printers, a page will not be printed when you clean the print
heads. You will, however, see and hear the print cartridge moving
during the cleaning process. As the cleaning process uses some ink, it
should only be used when necessary.
30 SETTInGS
Print & Cut

Print Quality

Paper type

. If the ink level for either cartridge gets low,
™
™