Operation Test - Spectral SMART CONTROL IR-LINK-SYSTEM Schnellstartanleitung

ENGLISH

1.4 OPERATION TEST

For the first operation test use the IR remote contols of your audio/video
devices. Once the IR link system is properly connected, the red indicator light
will flash on the IR module, when you press a key on the (infrared) remote
control while pointing it at the IR receiver.
Close the front of your furniture and make sure that the audio/video devices
cannot receive a direct IR command from the remote control. This could lead
to operation problems.
Check if all audio/video devices respond to the signals of your IR remote
controls. If necessary, adjust the position of the IR receiver (1) and the IR
Blaster LEDs (2).
2. INSTALLATION SMART CONTROL APP
Download the Spectral Smart Control App from the App
Store or from Google Play on to your iPhone, iPad or iPod
and open the app.
Once successfully connected with your Smart Control
module, you can operate a selection of pre-programmed
devices right away, create your own remotes, and program
and edit each key individually.
For more information and detailed instructions, look at the app's help
menu and visit app.spectral.eu.
9