Spectral SMART CONTROL IR-LINK-SYSTEM Schnellstartanleitung Seite 7

ENGLISH
1.1 SETTING UP THE IR RECEIVER
Place the IR receiver (1) of the IR link system within the range of your audio/
video devices' (infrared) remote control.
A suitable location for the IR receiver would be, for example, on the furniture
element in which the audio/video devices are located or near the TV.
1.2 SETTING UP THE IR BLASTER LEDS
For devices behind closed furniture flaps mount the IR Blaster LEDs (2) on
any place inside the furniture to operate all audio/video devices in one and
the same compartment. When properly mounted, a single IR LED Blaster can
operate all audio/video devices that are in the same compartment.
For devices within sight (TV, soundsystem) mount the IR Blaster LEDs (2) as
close as possible to the devices' IR sensor.
2
2
7