Safety Notes; Important Notes; Functions - Trix 22781 Bedienungsanleitung

Safety Notes

• This locomotive is to be used only with an operating system
designed for it.
• Analog nax. 15 volts DC, digital max. 22 volts AC.
• Use only switched mode power supply units and transformers
that are designed for your local power system.
• This locomotive must not be supplied with power from more
than one power pack.
• Pay close attention to the safety notes in the instructions for
your operating system.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 611 655 interference
suppression set is to be used for this purpose. The interfe-
rence suppression set is not suitable for digital operation.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a component
part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• The warranty card included with this product specifies the
warranty conditions.
• http://www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation with H0 2-rail DC
systems (track according to NEM standards) with con-
ventional DC power packs.
• This locomotive comes equipped with a Trix
connector for digital operation and can have the
Märklin locomotive decoder 60942/60945 installed
in it.
• Trix motor vehicles must not be operated on digital systems
without an built-in engine decoder (Motor can be damaged!).
• Minimum radius for operation is 360 mm / 14-3/16"
• A 7226 (Märklin) smoke generator can be retrofitted to the
locomotive - also for analog operation.
9