Viking ME 545 C Gebrauchsanleitung Seite 45

Fault
- Vario drive speed control not
functioning (on ME 545 V)
- Poor cut, lawn turning yellow
- Starting problems or
deteriorating motor
performance
- Ejection chute blocked
0478 121 9909 E - EN
Possible cause
- Lever moved in wrong
direction
- Vario drive cable disengaged
or damaged
- Mowing blade is blunt or worn
- The rate of feed is too high in
relation to the cutting height
- Mowing grass which is too
long or too wet
- Mower housing is blocked
- Mowing blade is worn
- Mowing grass that is too long
or too wet
see motor instruction manual
If necessary, contact a specialist dealer; VIKING recommends VIKING specialist dealers.
Remedy
- Move lever in right direction
- Attach or replace vario drive
cable
- Re-sharpen or replace
mowing blade
- Reduce rate of feed and/or
select correct cutting height
- Work at appropriate cutting
height and mowing speed for
mowing conditions
- Clean mower housing
(disconnect mains plug before
cleaning)
- Replace the mowing blade
- Work at appropriate cutting
height and mowing speed for
mowing conditions
Page Illustration
10 13
19
12,
7 7
7 7
11 16
19
12,
7 7
17