Viking ME 545 C Gebrauchsanleitung Seite 33

- Caution!
Never put your
hands or feet on
or underneath
rotating parts. Never touch
the rotating blade. Always
keep away from the
ejection aperture. Always
observe the safety
distance indicated by the
handlebar.
Risk of injury!
- Never lift or carry a mower
with the motor running or
the mains lead connected.
- Switch off the motor and
disconnect the plug:
- Before remedying
blockages, including
those in the ejection
chute;
- If the cutting tool has hit
a foreign object. The
cutting tool needs to be
checked for possible
damage;
0478 121 9909 E - EN
- Before checking,
cleaning or working on
the mower;
- If the mower begins to
vibrate excessively. The
cutting tool must be
checked immediately;
- Before leaving the
appliance unattended;
- Before lifting, or carrying
the appliance;
- Before transporting the
appliance.
- Beware of the
cutting tool
running on for
several seconds
before coming to a
standstill.
Maintenance and repairs
Before performing
any work on the
appliance, before
adjusting or cleaning
the mower, or before checking
whether the connection cord is
entwined or damaged, switch
off the mower and disconnect
the plug.
Only carry out maintenance
work that is described in this
instruction manual.
All other procedures should be
carried out by a specialist
dealer.
VIKING recommends that you
have maintenance operations
and repairs performed
exclusively by a VIKING
specialist dealer.
VIKING specialist dealers
regularly attend training
courses and are provided with
technical information.
Only use high-quality tools,
accessories and spare parts.
Otherwise, there may be a risk
of accidents resulting in
personal injury or damage to
the appliance.
VIKING recommends the use
of original VIKING tools,
accessories and spare parts.
Their properties are optimally
adapted to the appliance and
the user's requirements.
VIKING original spare parts
can be recognised by means
of the VIKING spare parts
number, the VIKING lettering
and where applicable the
VIKING spare parts symbol.
The symbol alone may also
feature on small parts.
- Ensure that all nuts, pins
and bolts are securely
tightened, so that the
appliance is in a safe
operating condition.
- If the cutting tool or the
lawn mower hits an
obstacle or a foreign
object, the motor must be
switched off, the plug
disconnected, and an
inspection performed by a
specialist.
- The lawn mower must not
be operated with a
damaged or bent
crankshaft.
Risk of injury through
defective parts!
- Check the grass-catching
unit regularly for wear,
damage or for loss of
functionality.
- In the interests of safety,
replace all worn or
damaged parts.
- Replace danger signs and
warnings on the appliance
which have become
illegible. Your VIKING
dealer has a stock of
replacement stickers.
5