Meccanica Benassi Daytona 2WD 2018 Bedienungsanleitung Seite 47

10. ES STATEMENT OF COMPLIANCE
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
Council Directive No. 2004/108/EC (Government directive NV 616/2006 Coll.)
Council Directive No. 2000/14/EC (Government directive NV 9/2002 Coll.)
A. We: Seco Industries, s.r.o., Podnikatelská 552, Běchovice, 190 11 Praha 9
IČO: 60193450
B. Mechanical equipment
- name: Riding mower
- model: AC 92
- serial number: 14 500 – 24 500
Description:
AC 92 is a four-wheel self-propelled riding mower with a Briggs & Stratton 21HP and 23HP, Loncin LC2P77F
engine. The power drive from the engine is transferred by a V-Belt to the travel drive transmission with
a continuously variable gear and through an electromagnetic clutch to the mowing deck. The mowing deck
is a singlerotor assembly with a vertical axis of rotation and a coverage width of 92 cm. It has two rotating
blades on a single carrier. The mowed material is dispersed on the ground.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 5395-1, 3, ČSN EN ISO 3767-1,2,3, ISO 11684, ČSN EN ISO 11201,
ČSN EN ISO 12 100-2, Council Directive No. 97/68/EC (2002/88/EC)
D. Assessment of compliance was performed according to the designated procedure in:
- EP and Council Directive No. 2006/42/EC, Annex VIII, (eqv.Annex no. 8, NV No. 176/2008 Coll.)
- EP and Council Directive No. 2014/30/EU, Annex II, (eqv.Annex no. 2, NV No. 117/2016 Coll.)
- EP and Council Directive No. 2000/14/EC, Annex VI, (eqv.Annex no. 5, NV No. 9/2002 Coll.)
E. Entities participating in the assessment of compliance:
Státní zkušebna zemědělských, lesnických a potravinářských strojů a.s. (SZS)
Třanovského 622/11, 163 04 Prague 8, Czech Republic
F. We confirm that:
- this mechanical equipment meets all respective provisions of the aforementioned directives (NV)
- measures have been taken to ensure the compliance of all products introduced to the market with
the technical documentation and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power L
Measured mean values of acoustic power depending on the engine used:
Engine
BRIGGS & STRAT TON 21 PS VANGUARD
BRIGGS & STRAT TON 23 HP VANGUARD
Loncin LC2P77F
Technical documentation of the scope required by appendix VII to regulation 2006/42/EC and by appendix VIII
of regulation 2000/14/EC is kept by the manufacturer at the following address:
Seco Industries, s.r.o.
Podnikatelská 552
Běchovice
190 11 Praha 9
In Jičín, on 1. 7. 2016
issue the following statement:
under the supervision of a notified person
from SZS Praha, NB 1016
Třanovského 622/11
163 04 Prague 6, ČR
is 100 dB(A)
WA G
Speed (min )
-1
3000
3000
2900
Ing. Aleš Housa
director of the engineering plant division
47
Measured level of acoustic power L
98
98
98
[dB(A)]
WA