Parking Brake Lever; Brake Pedal - Meccanica Benassi Daytona 2WD 2018 Bedienungsanleitung

(7) PARKING BRAKE LEVER

The parking brake has two positions. In position (1) the brake is not active,
after shifting to position (2) while stepping down on brake pedal the parking
2
brake is activated (will brake).
Stepping on the brake pedal will deactivate the parking brake and the lever will
1
automatically be released and shift to position (1).

(8) BRAKE PEDAL

Pressing the brake pedal will slow down the riding mower.
Never use the brake at the same time as the travel direction function – there is
a danger of damaging the transmission!
(9) DIFFERENTIAL LOCK PEDAL
The pedal is used only if necessary and only when driving directly forward. It has two positions:
When the pedal is pushed down the lock is engaged.
When the pedal is released the lock is automatically disengaged.
Use the lock only when driving directly forward and only if necessary (loss of
traction). Never use the differential lock when changing travel direction. Otherwise
there is a risk of serious damage to the transmission!
(10) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing the lever must be set to the transport position!
The mulching function can be improved by using a special accessory, a so-called „mulching
set", which is supplied separately as a special accessory for mowing maintained lawns.
The lever has 4 work positions (50 - 60 - 75 – 100 mm), where the
corresponding mowing height is 5 to 10 cm. The higher the number
of the lever position, the higher vegetation height remains after
mowing.
There is also 1 transport position, which is 120 mm above the
ground. When the lever is set to the transport position it is not
possible to activate the mowing deck as a safety switch is built into
this position.
25