Meccanica Benassi Daytona 2WD 2018 Bedienungsanleitung Seite 24

(3) NEUTRAL GEAR ENGAGED INDICATOR
The indicator light serves to show that the travel lever is in neutral.
(4) MOTOR HOURS COUNTER
Displays the number of motor hours.
Tampering with the counter will void the warranty – the motor hours connection is equipped
with a tamper seal.
Immediately contact your service centre if the motor hours counter malfunctions.
(5) MOWING DECK ACTIVATION SWITCH
Pressing the part with the symbol engages the mowing deck. Pressing the part without the symbol
disengages the mowing deck.
(6) MOWING DECK ENGAGEMENT AND RUN DOWN INDICATOR
This indicator indicates when the mowing deck is on and running down.
Light is on
Flashing
The switch needs to be pressed when the mowing deck has already been
automatically disengaged but the blades have not yet stopped rotating
(approx. 4 seconds) or when the mowing deck is started immediately
before the reverse travel pedal is stepped on. Then with every
subsequent change in the travel direction from reverse to forward, the
disengagement of the mowing deck is again reactivated.
Not lit – the travel lever is in position F (forward) or R (reverse)
Lit green – the travel lever is in position N (neutral)
Deactivation of the mowing deck / the mowing deck is
DEACTIVATED
deactivated.
ACTIVATED Activation of the mowing deck
The mowing deck is activated
The mowing deck is deactivated, but the blades are still rotating (the
indicator flashes for approx. 10 seconds)
24