Set Odd/Even Day Scheduling Option; Set Interval Scheduling Option - Nelson SmartZone EZ Installations- Und Programmieranleitung

PROGRAMMING INSTRUCTIONS

Set Odd/Even Day Scheduling Option

Turn the large dial to the ODD/EVEN position. The last scheduling option chosen for the current
program or the default 1 day interval scheduling option will appear on the LCD. To set either an
odd or an even schedule press the SELECT
watering). An arrow will appear on the LCD next to the appropriate schedule (Odd or Even). The
SELECT buttons act as toggle keys and will toggle between odd or even.
NOTE: Programming an ODD/EVEN schedule deletes any other schedule for the selected
program.

Set Interval Scheduling Option

Turn the large dial to the INTERVAL position. The last scheduling option chosen for the current
program or the default 1 day interval scheduling option appears on the LCD. Press SELECT
to set the interval days between watering (1-30). The date displayed is day one of the interval
schedule. (today's date if one has been set). As needed, change the date for day one of the
interval schedule with ADJUST
Repeat the above procedures for each program (A, B, or C) you require.
That's it! Your SmartZone
run the program you entered.
NOTE: Programming an ODD/EVEN schedule deletes any other schedule for the selected
program.
PROGRAMMING INSTRUCTIONS
(can only be set up to 30 days out).
EZ is now programmed. Turn the MODE dial to the AUTO position to
TM
button (a date must be set for odd/even
18