Set Start Times; Set % Water Budget - Nelson SmartZone EZ Installations- Und Programmieranleitung

PROGRAMMING INSTRUCTIONS

Set Start Times

A START TIME is the time of day a program will start running. The SmartZone
start times per program.
Turn the large dial to the START TIMES position. Press SELECT
want to set (1, 2, or 3). Press ADJUST
as needed.

Set % Water Budget

% WATER BUDGET changes the duration of run times in a program by the percentage entered 5
- 200% (i.e., a 10 minute run time at 50% water budget will run 5 minutes). This feature is useful
when changes in weather occur. If it is unusually dry, you may want to extend your run time for
each zone in a program. With % Water Budget, you can change one number, and all run times in
the program are adjusted.
Turn the large dial to the % WATER BUDGET position. A % symbol will appear on the LCD to let
you know you are working on the % Water Budget amount. Press ADJUST
desired percentage amount.
to set the time of day the program will start. Repeat
EZ allows three
TM
to select the start time you
to choose the
15