Facom 1003B.E Bedienungsanleitung Seite 5

Contents
1. Introduction
2. Technical Data
3. Safety information
4. Starting operation
5. Functional description
6. Maintenance
1 2 3
4
11
13 + 14 10
1. Display
2. Supply unit
3. Control buttons
4. Holder
5. Tip magazine
6. Soldering tool
7. Soldering tip
1. Introduction
Read user manual and safety instructions carefully and keep
in a safe place for future use.
Check contents of package
• Soldering station
• Power cable
• Soldering iron with tip
• Holder stand
• User manual (www.facom.com)
Should the above components be damaged or incomplete, please
contact your supplier.
Key to symbols
Attention!
Danger spot
EN
5 7 6
8
9
12
8. Sponge bin
9. Viscose sponge
10. Power switch
11. Soldering iron plug
12. Soldering iron connecting cable
13. Power cord
14. Power plug
Hot surface!
Risk of burning
yourself !
Equipment features:
• Antistatic desing
• Stong electrical protection
• Full-wave control
• 16,5 V~ small voltage for soldering iron
• VDE-GS, CE, VDE-EMC marks of conformity
2. Technical data
Electronics station
Supply voltage: 230 V~, 50-60 Hz
Secondary voltage: 16,5 V~ : Output: 68 W
Temperature range: continuous, 150 °C - 450 °C / 300 °F - 842 °F
Function display: 4-character LED display with menu control
Cable: 1 m PVC with device socket
Design: antistatic according to MIL-SPEC/ESA standard
Dimensions: 145 mm x 80 mm x 103 mm
Weight: 1,05 kg
Soldering iron 1003B.68E
Voltage: 16,5 V~
Output: 68W / 350 °C
Dimensions: 175 mm x Ø 12 mm
Weight (without cable): 30 g
Cable: 1 m ultra-fl exible, heat-resistant, antistatic
Design: antistatic according to MIL-SPEC/ standard
Holder Dimensions: 140 mm x 80 mm x 80 mm / Weight: 0,2 kg
3. Safety instructions
For safe use of these soldering irons, these safety instructions should
be carefully read and followed.
• Usage. Using a unit for applications other than those for which
it is intended, or when damaged, will cancel the manufacturer's
warranty and liability.
• Inspection of all components before use. Any faulty component
should be replaced by a specialist or the manufacturer.
Faulty repairs may be dangerous for users. Always use genuine
Facom replacement parts.
• Heating. Before switching on, ensure that the tip is correctly fi tted
to the unit. Never let a soldering or modelling tip come into contact
with skin, hair or any other heat-sensitive or fl ammable material. A
heat-resistant worktop is recommended.
• Access restrictions. Make sure that no-one, in particular children,
comes near the soldering iron without your consent.
• Danger of fi re! Before heating a soldering iron, ensure there are
no fl ammable items, liquids or gas containers in the vicinity. When
stopping work, always replace the iron in the correct holder, and
switch off power immediately (not applicable to non-electric units
such as gas irons).
• Never leave a hot iron unattended. Depending on working
temperature, soldering irons take a variable amount of time to cool
down after switching off
• Keep the workspace tidy. Disorder increase the risk of accident.
• Lead-based solder is toxic. Soldering emissions should not be