Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The room in which the equipment is to be installed must be dry and suitable ventilated, avoiding direct exposure to
the sun or positionning near a heat source. The place must be protected against beatring rain and dust. A good air
circulation especially around the compressor is essential for a good operation. Keep the air vent openings of the
compressor cover always free from any obstructions.
The maximal permissible inclination of the appliance is :
for RCW42DC : 30°
for RCW42AC : 5°
C
ONNECTING TO A BATTERY
C
ONNECTING TO A CONVERTER
AC/DC - converters, automobile generators or similar
must always be connected to the battery poles.
T
HESE APPLIANCES MUST NEVER BE CONNECTED DIRECTLY
.
TO THE BOX
The leads must be connected using cable shoes and
screwed connections; joined leads must be avoided.
A
: The existing connection cable of the box must not be
TTENTION
prolongated. If a longer connection cable is absolutely necessary, the
cable cross-section must be increased according the table.
I
NSTALLATION
E
LECTRICAL CONNECTION
˜
RCW42DC
The appliance must always be directly connec-
ted to the poles of a battery :
Converter
Convertisseur
Umwandler
I
F CONNECTING TO THE WRONG POLES
OF THE ELECTRONIC UNIT WILL BLOW AND THE
ELECTRONIC UNIT MAY BE DESTRUCTED
cable cross-
- 5 -
RCW42DC :
max. 30°
RCW42AC :
max. 5°
PLUS TO PLUS
MINUS TO MINUS
˜
cable length in m
section
in mm
2
12V
2.5
2.5
4
4
6
6
10
10
16
16
,
THE FUSE
!
Converter
Convertisseur
Umwandler
24V
5
8
12
20
32
Werbung
Inhaltsverzeichnis
