Sensitivity Setting; First Test; Technical Specifications - Velleman HAA55 Bedienungsanleitung

5. Sensitivity Setting

Turn the PIR adjustment trimmer to the right to diminish; turn the trimmer to the left to increase.
Turn the M/W adjustment trimmer to the right to increase the microwave induction sensitivity; turn the trimmer to the
left to decrease the sensitivity.

6. First Test

Set JP1 to ON and power the detector. You will see the 3 LEDs blink. The unit will enter the working mode after 60
seconds.
• Testing the PIR sensor
Set JP3 to 4s, set JP2 to OFF. Move in front of the detector. The green and the red LED should light respectively.
• Testing the glass break sensor
Set JP2 to 4s; set JP3 to ON. Close the housing. Move in front of the detector. The yellow and the red LED
should light respectively.

7. Technical Specifications

Power Supply
Current Consumption
Standby
Operational
Detection Distance
PIR
Glass
Detection Angle
Warm-Up Time
Alarm Time
Alarm Output
Tamper Switch
Dimensions
Total Weight
Operating Conditions
The HAA55 can provide valuable protection for your home and property when utilized correctly. However,
this unit cannot guarantee complete protection against burglary and robbery. Therefore, VELLEMAN
cannot be responsible for any loss or damage which could occur.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
HAA55_v2
9~12VDC
14mA
22mA
± 10m
± 6m
105°
30s
2s/4s
28VDC/100mA
28VDC/100mA
135 x 70 x 56mm
130g
-20°C~50°C / 95% RH max.
- 4 -
nv
®
VELLEMAN