Ordering Spare Parts; Disposal And Recycling - EINHELL BT-TW 150 Aufbauanleitung

Anleitung_BT_TW_150_SPK1:_
the lock is defective or you cannot find the keys:
Undo the screw for the lock catch by removing the
support (7) and pulling off the "QA" sticker. Then use
a screwdriver to turn the screw clockwise in the hole
until it is tight. Finally actuate the emergency release
(4). You can then open the drawer again (see Figure
7/8).
Important!
When you are finished, open the drawer and turn the
screw back to its original position so that the lock
function is restored.
5. Cleaning
Clean the tool trolley with a slightly damp cloth and if
necessary a small amount of conventional paint
cleaner. To avoid damaging the surfaces do not use
solvents or other aggressive or scouring cleaning
products.

6. Ordering spare parts

Please provide the following information on all orders
for spare parts:
Model/type of the equipment
Article number of the equipment
ID number of the equipment
Part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
The spare part number of the key can be found on the
flat face of the key and on the lock (Fig. 9/10)

7. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
29.06.2011 12:45 Uhr Seite 9
GB
9