Note On The Water Filter; Operation - Klarstein VAPOAIR Bedienungsanleitung

EN
16

NOTE ON THE WATER FILTER

1. The plastic component contains nano-material to prevent the growth of bacteria.
2. Ceramic filters can soften hard water. Ceramic filter demineralises the water.

OPERATION

Before first use
• When using for the first time, leave the appliance at room temperature for half an
hour before use.
• It is recommended to use the unit below a temperature of 20 °C and at a relative
humidity of less than 80 % rel. humidity.
• Use clear water below 40 °C.
• Check the water basin to make sure it is clear.
Getting started
1. Place the appliance on a flat surface.
2. Fill the water into the water tank and then tighten the tank cap.
3. Place the water tank on the base unit and deactivate the child lock.
4. Check that the rated voltage matches the input voltage and plug in the socket.
The ON/OFF symbol
5. Touch the ON/OFF icon
working in AUTO mode.
6. Touch the MAX-MIN button
at level 1. 3 fog levels are available. The display shows the corresponding number
of bars (1, 2 and 3 bars). Touch the icon again to go to AUTO mode. You have the
same choices on the remote control.
Ioniser
To start the ioniser, press the button
button again to switch the function off.
lights up.
on the unit. The background LED lights up. The unit starts
. AUTO mode is exited and the fog converter runs
. The display shows the tree symbol. Press the