Disty box 5000 Bedienungsanleitung Seite 33

2 Registration / programming
Function
Volume setting
The handset volume can be adjusted here for the acoustics of your con-
nected device in increments of 3 dB (1 = minimum, 6 = maximum).
Factory setting: 5
Display of caller's number / CLIP 44
The caller's phone number is not transmitted to the connected tele-
phone. The ring cadence of calls is controlled by the base station.
Please note: function 51 is not available.
Display of caller's number/CLIP. For CLIP transmission to the con-
nected Phone the FSK type 1 protocol is used, which is common in
most countries. The ring cadence is fixed.
Display of caller's number/CLIP. For CLIP transmission to the con-
nected Phone the DTMF protocol is used, which is common the Net-
herlands. The ring cadence of calls is contolled by ehe base station.
Factory setting: 1
Parameter Other input
code
43 1...6 #
0 #
44 1 #
44 2 #
11