Setup 3: Secure The Cords And Close The Back Cover - Sony SDM-S94 Bedienungsanleitung

SDM-S94
1
to AC IN
2
to a power outlet
power cord (supplied)
Setup 3: Secure the cords and
close the back cover
1
Remove the stand cover.
2
Gather the power cord and video signal cables
using the cable holder on the cabinet (SDM-S74).
Secure the video signal cables using the cable
holder on the cabinet (SDM-S94).
3
Feed the cables and cord into the stand, and secure
them by using the cable holder (SDM-S74).
Feed the power cord through the hole on the left of
the stand and gather and clump the power cord and
video signal cables by using the cable holders
inside (SDM-S94).
4
Replace the stand cover and then slide down the
back cover.
Make sure that cords come out through the opening at the
bottom of the stand cover, for proper placement of the stand
cover.
8
SDM-S74
4
back cover
2,3
cable holder
SDM-S94
4
back cover
3
1,4
stand
cover
2
cable holder
3
cable holder
1,4
stand
cover