The Battery; Charging; Changing - oneConcept XL-618 Clean Free Bedienungsanleitung

EN
22

THE BATTERY

Charging

1 Turn off the cordless vacuum cleaner.
2 Connect the adapter of the power supply unit to the charge connector on
the vacuum cleaner.
3 Connect the plug of the power supply to the main power outlet. The
segments of the battery charge indicator will not flash one after the other
when charging progresses. When the battery is fully charged, the battery
charge indicator will turn off.
WARNING: Only use the supplied AC adapter to charge. Using a different
power supply may damage the device.

Changing

To replace or remove the battery, hold the vacuum cleaner and press the
release button on the battery. Remove the battery.
To insert a new battery, slide the battery into the battery compartment under
the handle of the vacuum cleaner until it snaps into place.
CAUTION: Before inserting a new battery, make sure it is compatible with
this device. If in doubt, contact a manufacturer-authorized service center.
The contact details of the manufacturer can be found at the beginning of this
manual.