Preparation Before Use; Setting Up The Product - oneConcept 10030672 Anschluss- Und Anwendungshinweise

1. Setting Up the Product

• Push the release button and rotate the front cover upwards. (Fig.1)
• Remove the water container using the attached handle. (Fig.2)
Remove the filter assembly from the water container.(Fig.3)
Fill the container with tap water to 'Max Water Level' indicated on the side of the container
This is about 0.8 litres. Please ensure the container is not overfilled. (Fig.4)
• Remove the filter assembly from the water container.(Fig.3)
• Fill the container with tap water to 'Max Water Level' indicated on the side of the con-
tainer . This is about 0.8 litres. Please ensure the container is not overfilled. (Fig.4)
16

Preparation before Use