Carpet Cleaning - Klarstein 10031893 Anleitung

EN
To vacuum large quantities of liquid, from a sink or tank etc., do not immerse the nozzle
completely in the liquid; leave a gap at the top of the nozzle opening to allow an air
inflow.
The machine is fitted with a float valve which blocks the suction action when the tank has
reached its maximum capacity. The user will notice an increase in motor noise. When this
happens, turn off the machine, disconnect from power supply, remove the head from the
tank and empty the liquid into a suitable receptacle or drain. To continue vacuuming,
refit the head and proceed. After wet vacuuming, turn the machine off and remove
plug from power supply. Empty the tank and clean/dry the inside and outside before
storage.

CARPET CLEANING

21