Cleaning And Care - Klarstein REINRAUM 2G 10030359 Bedienungsanleitung

CLEANING AND CARE

• Unplug the power cord.
• Pull the hose off the housing.
• Open the clamps and remove the upper structure with the motor.
• Remove dirt and debris from the container and hose.
• Clean the foam filter by washing it with a mild soapy solution.
• Check that the suction tube is functional. Check to see whether the power
cord is damaged.
TROUBLESHOOTING
Problem
The vacuum cleaner
does not work.
Dust comes out of the
motor cover.
Reduced power,
increased engine
operation, or vibration.
No spray function.
Cause
No power supply.
Defective power supply
cable.
Container is full of liquid.
Dust bag is missing or
damaged.
Clogged filter, nozzle,
hose or container outlet.
Switch is in the wrong
position.
Shampoo tank is empty.
Shutter release or tubes
incorrectly installed.
Solution
Check power supply.
Check the power cord
and have it replaced if
necessary.
Empty container.
Replace the dust bag.
Clean and replace
the dust bag. Check
the nozzle, hose and
container outlet for
blockages.
Set the switch to the
correct position.
Refill shampoo.
Check the connections.
Make sure that the
hoses are not kinked.
EN
21