Cleaning And Care - Klarstein CLEANBUTLER 3G TURBO Handbuch

EN
20
Use of the device
1. Before using the device, make sure that the battery compartment is inserted
in the device.
2. Install only accessories recommended by the manufacturer.
3. When you press the switch on the handle, the device is ready to use. Release
the switch when you want to stop the device.
4. When the device is switched on, the green indicator lights up.

CLEANING AND CARE

Cleaning the dust collector
When the dirt in the dust collector reaches the maximum display, you should clean
the dust collector and the cyclone cone system as soon as possible in order to
achieve the best cleaning effect.
1. Press the release button on the dust collector. Remove the dust collector as
soon as the vacuum cleaner is off.
2. Hold the dust collector over a rubbish bin and slowly pull out the cyclone cone
system.
3. Gently shake the dust collector and dispose of the contents of the dust
collector in the bin.
4. If necessary, the dust collector can be washed out directly with water. After
washing the dust collector, it must be completely dry before you can use it
again.