Recording Using Vos Voice Controlled Recording; Starting The Next Recording Immediately; Remaining Recording Time - AUDIOLINE VR-C10 Bedienungsanleitung

RECORDING USING VOS VOICE CONTROLLED RECORDING

When VOS is switched on, any pauses that occur during recording will not be re-
corded. When you are not speaking, the VoiceRecorder switches the recording to
Pause (display shows "VOS"). When you speak again, the unit continues recording
automatically.
Switching VOS on or off
If the unit has not yet been switched on, press the REC/STOP button to switch
the unit on.
Press the MENU multifunction button twice and choose whether you want to
switch the function on or off by means of the
mode is switched on, the VOS indicator will appear in the display.
Press the MENU multifunction button down in the middle once and the display
will return to normal.
Press the REC/STOP button to start voice controlled recording.

STARTING THE NEXT RECORDING IMMEDIATELY

You can start the next recording immediately while a recording is being made. To do
this, press the multifunction button
stopped and the next recording will be started immediately under a new number.

REMAINING RECORDING TIME

Hold the PAUSE button pressed for two seconds during a recording. The display will
now show the remaining recording time for the currently set recording mode (SP or
LP). The current recording length will be shown again after 15 seconds.
or
up once. The present recording will be
buttons. When the VOS
19