Starting Next Recording Directly; Display Remaining Recording Time; Direct Recording; Vos - Voice Controlled Recording - AUDIOLINE VR200 Bedienungsanleitung

OPERATION AUDIOLINE VR200

STARTING NEXT RECORDING DIRECTLY

You can start the next recording directly while making the current
recording. To do this, press the multi button once
upwards. The current recording will be stopped and the next re-
cording started immediately under a new number.

DISPLAY REMAINING RECORDING TIME

You can find out the remaining memory capacity during a recording.
To do this, press and hold the FILE button and the display will show
you the recording time remaining in minutes and seconds.

DIRECT RECORDING

To start recording directly even when the unit is switched off, press
the REC button for 2 seconds.
VOS – VOICE CONTROLLED RECORDING
The voice controlled recording mode (Voice Operated System) can
be switched on using the VOS slide switch on the left-hand side of
the unit.
When VOS is switched on (slide switch in the direction of the ar-
row), any pauses that may occur during recording will not be re-
corded. When not speaking, the AUDIOLINE VR200 switches the
recording to Pause (display shows "SENSE"). On speaking again,
the unit automatically continues recording.
When VOS is switched off, recording takes place continuously.
26