Setting The Recording Mode; Recording Notes - AUDIOLINE VR-C10 Bedienungsanleitung

SETTING THE RECORDING MODE

The maximum recording time is 126 minutes in standard mode and 256 minutes in
long-play mode. The recording mode currently selected will be shown in the display
with SP = Standard mode and LP = Long-play mode. You can change the recording
mode at any time.
Press the MENU multifunction button down in the middle
once with the unit switched on.
Now select the required recording mode SP (Standard) or
LP (Long-play) with the
selection will be shown in the display.
Press the MENU multifunction button down in the middle
twice and the display will return to normal.

RECORDING NOTES

Make sure that the HOLD slide switch is in the OFF position (slide switch down).
If the unit has not yet been switched on, press the
REC/STOP button to switch the unit on.
Press the REC/STOP button to start recording. The
display will show the message "REC" and the red re-
cording LED will come on. During recording, the length of
the message and the number of the message will be
shown in the display. Now speak into the microphone at
the top of the unit.
You can interrupt the recording with the PAUSE button. If the recording is
interrupted for more than 10 minutes, the recording will be terminated.
The recording is terminated by pressing the REC/STOP button again. Each
recording is automatically identified with a number between 1 and 99.
If the capacity is reached or if the maximum recording time is exceeded, the display
will show the message "FULL". In order to record new notes, you must first delete old
or unimportant recordings.
18
multifunction button. The