Recording Memos - AUDIOLINE VR450 Bedienungsanleitung

AUDIOLINE VR450

RECORDING MEMOS

Ensure that the HOLD slide switch is in the OFF position
(slide switch down).
Press REC to switch the unit on.
Using the FILE button select the required archive file A, B, C
or D.
Now select the required recording mode SP (Standard) or LP
(Long-Play) using the MODE button. The selection will be
shown in the display.
To start recording, press the REC button once more. The
display shows the message "REC" and the red recording LED
illuminates. During recording, the length of the message and
the number of the message will be shown in the display. Now
speak into the microphone on the top of the unit.
You can break off recording using the MODE/PAUSE button. If
the recording is paused for more than 30 minutes, the re-
cording will be stopped.
Recording is ended by means of the REC button or the multi
switch
with a number between 1 and 100.
If the maximum capacity of the selected archiving file is reached or
if the maximum recording time is exceeded, the display will show
the message "FULL". In order to be able to record new memos you
must first erase old or unimportant recordings.
. Every recording will be identified automatically
OPERATION
25