Changing The Dust Bag - Bosch BSG6 Series Gebrauchsanweisung

Changing the dust bag

en
Replacing the dust bag
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the
highest suction power is selected, the dust bag must
be changed, even though it may not yet be full. In this
case it is essential to change the dust bag due to the
type of material it contains.
The nozzle, suction pipe and flexible tube must not be
blocked, as this would also lead to dust bag change
indicator being triggered.
*
The handle can easily be detached from the hose to
remove blockages.
* Depending on equipment level
Open the lid by moving the locking lever in the
direction of the arrow.
Seal the dust bag by pulling the sealing strip and then
remove it.
For increased uptake of dust, even if the dust bag
is already part-full, we recommend the use of
replacement filter type BBZ41GPlus.
31