Closing The Door; Technical Data; Environmental Concerns - Electrolux ERN1200FOW Benutzerinformation

14 www.electrolux.com
It is strongly recommended
to use original spare parts
only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION!
Disconnect the plug from the
mains socket.
1. Using a screwdriver, remove the
screw from the lamp cover.
2. Detach the lamp cover in the
direction of the arrows.

9. TECHNICAL DATA

9.1 Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information is situated in
the rating plate, on the external or

10. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
3. Replace the lamp with the one that
has identical characteristics and is
specifically designed for household
appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains
socket.
7. Open the door.
Make sure that the light switches on.

8.3 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer
to assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
mm
mm
mm
Hours
Volts
Hz
internal side of the appliance and in the
energy label.
electronic appliances. Do not dispose of
.
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
815
560
550
13
230 - 240
50