Safety Features - Phocos CXN Bedienungsanleitung

Menu 8: Settings of Excess Energy Management and datalogger
To use CXI or CXM, the functions of CXN interface should be properly set in this
menu.
Menu 9: Individual/factory settings
You can save your current menu setting or reset to default factory setting in this
menu.
Programming logout
When you exit programming menu, the controller displays the state of charge
(available energy) of the battery and the status of the load.
Mind that once you have entered the programming menu you can exit it at
the last item only.
We therefore recommend that you first note down your required settings in
the check boxes beside the menu structure and then do the programming in
one go. This makes programming easier and avoids errors.
All programming settings are stored in a non-volatile memory and remain
stored even if the controller was disconnected from the battery.

Safety Features

The controller is protected against wrong installation or use:
39