Phocos CXN Bedienungsanleitung Seite 37

Mode 5: Disconnect at 11.0 V fixed setting. Appropriate if bypass loads draw
current directly from battery. Mode with lower disconnection point. Battery is
cycled deeper, this can shorten battery lifetime.
The controller is preset to Mode 1 from the factory. Use Programming Menu 2.
to change the setting (see back page).
In case of doubts which mode to choose, consult your dealer because this has
to be evaluated depending on the battery used.
Nightlight Function
The CXN controller comes with a sophisticated nightlight function. It controls
the load output at night and is widely programmable.
There are 2 modes available:
DUSK TO DAWN and EVENING/MORNING. The mode can be selected in
Programming Menu 3.
Light on
Light off
Light on
Light off Number of
Evening Timing
hours
or
Time to mid of
night
1/2
Dusk to Dawn
Mid of night
Time to mid
after night
34
Morning Timing
Number of
or
hours
1/2