Power On/Off - LD Systems MAUI P900 Bedienungsanleitung

LINE IN L/R
8
Balanced line input with XLR sockets (left/right) to connect a playback device (such as a mixer, keyboard).
When both input sockets are used, the signals are summed internally to a mono signal.
THRU L/R
9
Balanced line output with male XLR sockets for direct routing of the input signal.
POWER SOCKET AND FUSE HOLDER
10
IEC mains socket with built-in fuse holder. A suitable power cable is included.
IMPORTANT: Replace the fuse only with a fuse of the same type and value. Follow the instructions printed on the housing. In the event of
repeated fuse failure, please contact an authorised service centre.
11

POWER ON/OFF

On–off switch for power supply to the device. Safe disconnection from the power supply is achieved only by pulling the
mains plug.
Examples of cabling and system expansion can be found in this manual under WIRING EXAMPLES.
8
8
9
11 10