Bluetooth Connection - Peaq PMN400-B Bedienungsanleitung

Bluetooth connection

R
Line Out
1. Connect the supplied adaptor to the power inlet. Connect the adaptor to a
suitable wall outlet.
2. Connect the supplied audio cables with the Line Out R/L sockets and with an
audio output source (i.e. your stereo).
3. Activate Bluetooth on audio source (e.g. mobile phone). Browse for devices and
select "My Munet xxxxxx * ".
4. Establish connection. If necessary, enter password 0000.
5. If necessary, select "My Munet xxxxxx * " as audio output device.
Notes:
• No installation of the Munet App required.
• Only one Bluetooth connection is possible at a time.
• In order to connect another audio source with Bluetooth, the previous connected
device must be disconnected.
* For "xxxxxx" use the WiFi Mac address of the individual MUNET.
PMN400_A5_140108 (1.6).indb 27
L
USB
Digital Out
5V 500mA
AUX IN
MUNET
ENGLISH
DC 9V 1A
WIFI
27
8/1/14 4:56 pm