Bluetooth Connection - Peaq MUNET PRO PMN700-B Bedienungsanleitung

Bluetooth connection

1. Connect the supplied adaptor to the power inlet. Connect the adaptor to a
suitable wall outlet.
2. Activate Bluetooth on audio source (e.g. mobile phone). Browse for devices and
select "My Munet xxxxxx * ".
3. Establish connection. If necessary, enter password 0000.
4. If necessary, select "My Munet xxxxxx * " as audio output device.
Notes:
No installation of the Munet App required.
•
Only one Bluetooth connection is possible at a time.
•
In order to connect another audio source with Bluetooth, the previous connected
•
device must be disconnected.
* For "xxxxxx" use the WiFi Mac address of the individual speaker.
PMN700_A5_140107 (1.6).indb 27
5V 500mA
WiFi
DC 12V 3A AUX IN
USB
ENGLISH
27
8/1/14 2:28 pm