Wired Connection - Peaq PPA20BT-B Bedienungsanleitung

English
Setting up Bluetooth connection
1. On/off button in ON position. A signal sounds. Blue
2. Activate Bluetooth on audio source (e.g. mobile
3. If necessary, select "PPA20BT" as audio output

Wired connection

1. Connect Micro-USB plug to LINE/DC socket.
2. Connect jack plug to audio source's headphone
3. On/off button in ON position. A signal sounds. LED
4. Start audio source playback.
A20BT_62x62mm_131022 (1.8) (01 - DE EL EN ES).indb 30 22/10/13 10:14 A
LED flashes rapidly. Speaker ready for connection.
phone). Browse for devices and select "PPA20BT".
Establish connection. If necessary, enter password
0000 .
device. LED lights up blue: connection established,
playback paused. LED flashes blue slowly:
connection established, playback continued.
socket.
stays red.
30