Product Description - Electrolux TK 5357 F Benutzerinformation

Unscrew cover plates D from the front of the
machine, rotate through 180°, screw on the
opposite side.
8. Unscrew door lock E , push down slightly and
remove from the front of the machine.
9. Press snap-in button F in and down, press
cover down slightly and remove from front of
the machine.
10. Change door lock E over to the opposite side,
screw down the door interlock.
11. On the other side, insert cover F and allow
snap-in button to lock into place.
12. Insert loading door and hinges into recesses
on the front of the machine and screw down.
Note regarding contact protection: The ma-
chine is only secure for operations again once all
plastic parts have been inserted.
Special accessories
• stack kit
Available from your Service Force Centre or
your specialist dealer
These intermediate installation kits can be used
to arrange the dryer and an washing machine

Product description

2
3
6
7
9
12
(60 cm wide, front loaded) as a space-saving
washer/dryer stack. The washing machine is at
the bottom and the dryer is at the top.
Read carefully the instructions supplied with the
kit.
• drain kit
Available from your Service Force Centre or
your specialist dealer
Installation kit for direct draining of condensate
into a basin, siphon, gully, etc. The condensate
tank then no longer has to be drained, it must
however remain in its intended position in the
machine.
Read carefully the instructions supplied with the
kit.
• pedestal with the drawer
Available from your Service Force Centre or
your specialist dealer
To situate the dryer in optimal high and have
some additional space to store (e.g. laundry).
Read carefully the instructions supplied with the
kit.
electrolux 53
1
4
5
8
10
11